Choosing compact bedroom storage requires balancing floor space with actual hanging capacity. The Lexington White 2 Door Wardrobe offers a streamlined footprint designed for smaller bedrooms, guest rooms, or apartments where bulky freestanding closets overwhelm the room. Standing at 180 cm high with a width of 79 cm and a depth of 52 cm, this unit maximizes vertical storage without demanding an excessive footprint.
Inside the clean white frame, you get a fixed top shelf and a full-width hanging rail suited for shirts, jackets, and everyday garments. Constructed from particle board and MDF with a paper foil finish, it balances lightweight handling with a sturdy 60 kg total weight capacity. Assembly is required out of the box, meaning you will need basic household tools and an hour or two to piece the components together.
Design Layout and Dimensions
Understanding the exact physical scale of flat-pack furniture prevents layout mistakes before delivery. The Lexington unit is built for tight spaces, but its internal layout determines what you can comfortably store.
- Height: 180 cm (approx. 70.8 inches)
- Width: 79 cm (approx. 31 inches)
- Depth: 52 cm (approx. 20.4 inches)
- Weight: 49 kg (approx. 108 lbs)
The external white finish fits neutral or contemporary bedroom themes. Two hinged doors feature simple pocket handles that keep the front profile clean and snag-free. Because the depth is 52 cm, standard adult coat hangers will fit comfortably facing forward or slightly angled, depending on the thickness of your winter garments.
Internal Organization Potential
Maximizing a two-door wardrobe requires clever space planning. Without built-in drawers, you must rely on the single hanging rail and the upper shelf.
The top shelf works well for bulky items like spare bedding, folded sweaters, or storage baskets holding accessories. Below the shelf, the hanging rail provides enough vertical clearance for dresses, blouses, and trousers folded over hangers. If you need more folded storage, place stackable plastic drawers or fabric hanging organizers on the floor of the wardrobe beneath your clothes.
Adding slimline velvet hangers instead of thick wooden ones can nearly double your hanging capacity, allowing you to fit more shirts into the same linear space.
Step-by-Step Assembly Guide
Flat-pack assembly can test your patience if you rush the initial steps. Follow this systematic approach to ensure your wardrobe stays square and sturdy.
- Unpack and Inspect: Clear a spacious floor area and lay down a protective blanket. Check all panels, screws, dowels, and hinges against the manufacturer manual checklist to catch missing parts early.
- Build the Outer Frame: Assemble the left, right, top, and bottom panels using cam locks and wooden dowels. Tighten fasteners securely, but don't over-torque them into the particle board.
- Attach the Back Panel: Square the frame diagonally before nailing or screwing the thin back panel into place. This step is critical; skipping it causes the entire wardrobe to rack and wobble.
- Install Hardware and Rail: Screw the cabinet hinges onto the doors and the interior side panels. Mount the hanging rail into its designated brackets before hanging the doors.
- Mount to the Wall: Anchor the unit to the wall using the provided safety brackets. Unanchored tall furniture poses tip-over risks, especially on carpeted floors.
Common Assembly Mistakes to Avoid
Avoiding typical mistakes saves hours of frustration and prevents damage to engineered wood panels.
- Ignoring the Wall Anchor: Many people skip the anti-tip wall strap because it hides behind the unit. Given the height and weight distribution, wall anchoring is essential for safety.
- Racking the Frame: If you nail the back panel while the frame is sitting crooked, the doors won't align properly. Measure diagonally from corner to corner until both diagonals match before securing the back.
- Over-Tightening Screws: Particle board strips easily if power drills are set to high torque. Use hand tools for the final turns to keep screw threads tight and secure.
For more tips on choosing durable materials for your home, check out guides from The Spruce or explore interior layout ideas on Better Homes & Gardens.
Frequently Asked Questions
Can the internal shelf be adjusted or removed?
The internal shelf in this model is typically fixed during construction to provide structural rigidity to the outer frame. Removing it can compromise the stability of the side panels.
What tools are needed for assembly?
You will need a standard Phillips head screwdriver, a hammer for the back panel tacks, and potentially a power drill for securing the wall anchor safely into wall studs or masonry.
How do I clean and maintain the white paper foil finish?
Wipe surfaces down with a soft, slightly damp cloth to remove dust. Avoid harsh chemical cleaners or abrasive scouring pads, which can strip or scratch the laminated paper finish.
Is the wardrobe heavy enough to require two people for assembly?
Weighing 49 kg in total boxes, it is manageable for one person, but having a second set of hands makes lifting the assembled frame upright and aligning the doors much easier.
